Pulp & Paper

Industries

Pulp & Paper Industries

Enzyme tower

Ceramic Tile lining with epoxy over a coat of Primer Aroon 20 (Caustic Temp 30 à 35 PH 11 à 12)

Chlorine Tower

Two layers of F.R.P. Lining in Arolister. Two layers of Ceramic Tile lining in Arolister
(Caustic Temp Ambient PH 1 à 10)

Chlorine Di-Oxide Tower

Two layers of F.R.P. Lining in Arvinyl – 1100 S. Two layers of Ceramic tile lining in Arvinyl – 1100 S
(Caustic Temp 30 to 35°C PH 1 à 12)

Hypotower / High density Tower

Ceramic Tile lining in Aroon 20 over a coat of primer (Calcium Hyp A Temp 30 to 40°C PH 6.5 à 7.5)

Pulp/Bleaching Chests

Ceramic Tile lining in Cement/ Sand Mortar/Pointing – Aroon 20 (Caustic Temp 30 to 40°C PH less than 11)

White water tank/ Foam Breaker tank

Ceramic Tile lining in Cement/ Sand Mortar/Pointing – Aroon 20 [Caustic 35 to 40°C PH 4 à 5]

Floor/Foundation below Paper machine

Ceramic Tile lining in Aroon 20 over a coat of primer

Vats

Ceramic Tile lining in Aroon 20 over a coat of primer [Caustic 60°C to 70°C PH Less than 10]

Demineralised Water treatment Plant

A.R. Tile Lining in Aroplex K / Arfurane R over mastic membrane – Aroprimer / Arocompound

Effluent Treatment Plant

A.R. Brick Lining in Aroplex K / Arfurane R over mastic membrane – Aroprimer / Arocompound

Chlorination Plant – Floors

5 mm thick Monolithic Epoxy Screeding over a coat of primer and two seal coats – Aroon 10

ANTI CORROSIVE COATINGS

Structures, Tanks Vessels, Pipelines, Utility Pipelines, Chimneys, Conveyor Belt & Structures,
Roof/Shades, Utilities etc.