Arcoset PU-10K is a coating based on Poly Urethanes which play a very important role to fight against corrosion and erosion. Arcoset PU-10K is a Non-UV resistant Aromatic polyurethane coating and thus is used for internal painting only. Never before have so much thought, R & D works, gone in curbing corrosion with a film of a few microns' thickness.

Arcoset PU-10K is a high strength, high build PU coating which is the result of the specific research and development towards this direction. With this, we are now able to supply high quality anti - corrosion coatings for internal structures, machinaries, walls, floorings etc giving a guaranteed long life and is economical at the same time.

Arcoset PU-10K is specially formulated PU systems to impart highly cross-linked films whereas the conventional urethanes give a linear, non-resistant film. The formulation is stoichiometrically adjusted to give optimum combination of toughness and flexibility. The film is quite tough, yet sufficiently resilient to withstand normal expansion and contraction of the substrate without cracking up. The film bonds firmly to a variety of substrates such as metal, wood, concrete, etc. and this quality together with resilience makes Arcoset PU-10K more suitable for protective uses than the conventional systems. They are safe bet for corrosive environments where the epoxy coatings would not stand up because of certain acids' presence, and where a polyester would fail due to extreme alkalinity.

• Excellent adhesion and durability.
  
• High abrasion resistance.
  
• Chemical & water resistance.
  
• Heat resistance - to temp from + 150°C to -25°C
  
• Acid & Alkali resistance.
  
• High fungi and mildew resistance.
• Anti fungal properties

Surface preparation : 
Prepare the surface upto Sa 2½ specification so as to attain a surface free of oil, dust, rust and previous coats. To attain such a surface, rust and previous coats are to be removed by manual methods like scrapping, chipping, hard wire brushing, emery papering, etc. Sand blasting may be adopted wherever necessary so as to attain a surface up to the minimum standard of 2nd quality of BS: 4232 - 1967. Solvents remove oil and grease. Chemical treatments may also be adopted so as to remove traces of rust by using phosphating chemicals, rust converters, etc.

Environmental conditions :
Relative humidity <85% - Atmospheric.>15°C

Cleaning Solvent :
APUC - 1

Thinner :
APUT - 1