|
Surface preparation : SA 2.5 / ISO 2501 / SSPC
SP-10 / NACE 2 (It covers the requirement of near white
blast cleaning of metal surface by the use of abrasive
)
For concrete surfaces it should be free of loose lattice.
Moisture in concrete <10%. Degreasing is done to
remove oil & grease
Environment condition : Relative humidity <85%
Atmospheric temp. >15°C.
Cleaning Solvent : ACC-1
Thinner : Thinner should not be used. this will
adversely affect performance of coating.
Note : Chemical resistance data is available on
request.
|