High Solid Epoxy Zinc Rich Primer

Arozinc rich primer is a high solid two pack zinc rich primer based on epoxy resin, Zinc dust and speciality additives. Zinc dust primers may be used to prevent corrosion of iron and steel in two ways.
(A) Active protection : Galvanic protection ( Cathodic / Sacrificial )

(B) Passive protection : Protection by means of a barrier ( Zinc oxides / binder )

Arcozinc combines the galvanic characteristics of a zinc coating with the barrier protection of a paint. It offers an excellent active and passive protection due to the special zinc oxides and the binder on the other hand.

(A) Active protection : Because Arrcozinc rich primer has > 90% of zinc in its dry film, it provides excellent cathodic protection to steel. Different tests ( 600 hrs salt spray test, humidity test ) prove that in very aggressive circumstances, the zinc in Arcozinc rich primer sacrifice itself, protecting the metal surface.

(B) Passive protection : As the Arocozinc rich primer oxidises, a layer of zinc salts slowly builds up on it, offering a barrier protection. Next to this, a supplementary barrier protection is provided by the binder in Arcozinc rich primer. The binder reduces the disintegration of the zinc.

Scope : It can be used on Iron / Steels only ( i . e. M . S. C. S. etc. )

 
 

Base High soil epoxy resin with high purity zinc dust greater than 90% in it's dry film
Hardener Polyamide based
Colour Grey ( Standard )
Volume Solids 60%
Specific gravity at 25°C 2.4 -3.9 gm /cc
Thickness ( DFT Range ) 60 -75 microns/ per coat
Temperature Resistance 90°C
Mixing Ratio 1 : 4 ( Hardener to Base )
Pot Life 30 -40 minutes at 25°C
Cure Tack free 12 hours at 25°C Full cure 7 days
Coverage

5 - 7 m2 / Ltr. / coat ( This may vary depending upon environmental conditions, work schedule and skills of applicator )

 

Overcoating time After tack free
Shelf life 1 year (Below 25°C)

 

 
   

Surface preparation : SA 2.5 / ISO 8501 / SSPC SP.10 / NACE 2
( It covers the requirement of near white blast cleaning of metal surface by the use of abrasives ).

Degreasing is done to remove oil and greases. Organic solventents (TCE), alkaline, solutions, steam, hot water detergents will completely remove greasy substances.

Environmental Condition : Relative humidity < 25 % Atmospheric Temperature > 15°C

Cleaning Solvent : AZRC - 1

Thinner : AZRT - 1

 

 

 

 

 

^ Top     
 

  Copyright © 2005, Arcoy Industries Limited