The Arfurathene system developed by Arcoy after plenty of research and study of corrosion problems prevailing in all major Industries. Arcoy is pioneer in the manufacture of corrosion resistant materials, have combined the properties of compatible co-polymers with latest technology to produce a New product that is far superior than all other Anti Corrosive materials and can withstand temp. upto175° C. Arfurathene is having Compressive Strength of 800-900 Kg/cm2 which is higher than the Compressive Strength of Bricks. Arfurathene offers excellent abrassive resistance in addition to corrosion resistance to Acid, Alkalies and Solvents. Arfurathene is having water absorption of 0.5% max. Since Arfurathene is resistance to most acids/alkalies, oils, greases, salts, solvents etc. is ideal for use in most of the industries where corrosion prevails. The outstanding corrosion protection and high bond strength never achieved in a mortar before, makes Arfurathene unequaled for a Broad range of application.

Arfurathene's superior resistance quality to a varieties of corrosion chemicals makes Arfurathene stands out to be the best cement of all corrosion resistive cements. It is highly recommended for floors drains, verticals, subject to excessive physical and thermal abuse because of its maximum compressive strength and flexural strength properties with negligible absorption property. This will also replace the lengthy procedure of conventional Acid Proof Tile lining.

Due to the above mentioned properties, Arfurathene system provides long term performance thereby saving the time as well as periodical maintenance cost. Hence, production will not be hampered due to plant shutdowns, time and again. Arfurathene system coupled with good engineering techniques and quality installation methods becomes an attractive option which sets the standards in plant floors of any industry.

Arfurathene floors are easy to install with trained technicians. The concrete floors/ foundations / drains etc., where the Arfurathene floors are to be made, must be absolutely sound. The floors and drains must have minimum 2% slope to avoid stagnation. The surface must be clean and dry.

 
Over the cleaned dry concrete surface Arfurathene primer is to be applied by brush application. When the primer is still tacky, Arfurathene mortar is applied using masons trowel and spread uniformly by masons steel float to the required thickness and finished smoothly. The initial set time will be usually 24 hours and final setting and full strength will be obtained after 7 days. The floor is ready for use from 8th day, onwards. However due to the exceptional properties, lined area can be put into use even after 3 days.

 
When stored in its original containers in a cool and dry place at room temperature under shade, Arfurathene powder and resin has shelf life of about one year.

The ARCOY Technical Department is maintained to provide you with assistance and advice on any problem of acid or alkali proof construction. Write them your service conditions to obtain prompt recommendations and design suggestions. No obligations of course.