|
Surface Preparation:
Concrete :
The concrete surfaces must be thoroughly cleaned by
means of wire/soft brushes to remove all loose particles,
dust, dirt, etc.
Metal :
Abrasion blasting like sand/shot/grit blasting is recommended
to achieve a surface upto 2½ specifications of
SSPC - SP - 10 i.e. to near white metal.
Degreasing is done to remove oil and greases. Organic
solvents ( TCE ) alkaline, solutions, steam, hot water
detergents will completely remove greasy substances.
The surface must be absolutely dry.
Application :
It can be applied by brush or by conventional spraying
equipment.
Packing :
It will be available in various sizes.
Health Safety :
Harmful by inhalation, swallowing and in contact with
skin and eyes. Do not eat, drink or smoke. Do not empty
into drains. Do not breath vapour/spray mist. Use only
in well ventilated areas. If necessary, wear suitable
respirator protection. Keep out of the reach of children.
N.B. : The
above information is given in goodwill without any warranty
|
