Surface Preparation:
Concrete
The concrete surfaces must be thoroughly cleaned by means
of wire/soft brushes to remove all loose particles, dust,
dirt, etc.
Metal
Abrasion blasting like sand/shot/grit blasting is recommended
to achieve a surface upto 2½ specifications of
SSPC - SP - 10 i.e. to near white metal.
Degreasing is done to remove oil and greases. Organic
solvents ( TCE ) alkaline, solutions, steam, hot water
detergents will completely remove greasy substances
The surface must be absolutely dry.
Application
It can be applied by brush or by conventional spraying
equipment.
Packing
It will be available in various sizes.
Maintenance
Remove oil and grease with suitable detergent. Remove
salt and other contaminants by high pressure fresh water
hosing. Remove loose material by power tool cleaning.
Hose down the surface and allow it to dry.
Health Safety
As a general rule, avoid inhalation of solvent vapour
or paint mist and contact of liquid paint with skin
and eyes. Provide forced ventilation when working with
solvent borne containing in confined spaces or stagnant
air. Provide respiratory, skin and eye protection. Follow
local and national safety regulations.
N.B.The above information is given in good will warranty
|
